Articles

Simms G3 Guide Waders Review 2022 Model

0 comments /
Simms G3 Guide Waders Review 2022 Model

In this Simms G3 Guide Waders review we are going to go over some of the changes Simms has made to this popular wader.

Once again Simms looks like they have knocked it out of the park with the revamped G3 Guide waders.  The name G3 Guide waders has been around for a lot of years now but we have seen the model change over the years.

It’s hard to believe that it’s actually been about four years now without a G3 change, this usually speaks volume to how well the waders been performing, and we must say the old ones were an excellent wader with our own usage of them being thumbs up.

G3 Guide Waders

Design and Materials

This new wader utilizes a 3 layer Gore-Tex upper and a 4 layer Gore-Tex Pro lower for the best in breathability, durability and longevity.  Simms has paid attention to the little details on the new G3 wader to make this the best G3 yet.

Belt Loops

Belt Loops

They have made two belt loops for your wading belt an upper and a lower so you can find the sweet spot for your body type.

Suspenders

Suspenders

The suspenders for the G3 have also been upgraded to air mesh system similar to that of the top of the line G4 wader for the ultimate in comfort on the water.

Gravel Guards

Gravel Guards

The gravel guards have also received some attention and are heavier duty and more abrasion resistant than previous models.

Pockets

Pockets

One last highlight feature of these waders is the zippered side pockets we find this such a simple little thing that makes a huge difference it allows for often needed items such as pliers or a hook file to be stored and never lost. 

Sizes

Sizes

The G3 Guide waders have 21 stock sizes and 6 customs size options. These have more sizes than even the G4 Pro wader.

How Long Do G3 Waders Last?

This is a question we get asked a lot and the answer is it depends on how the kind of fishing you do and how often you wear them.

Where Are Simms G3 Waders Made?

The new Simms G3 waders are made in the in Bozeman, Montana, USA.

What is The Best Wader on The Market Today?

This is a matter of personal preference, but Simms are definitely on the list.

The Verdict of This Review

Needless to say, we at Sea-Run Fly & Tackle highly recommend these waders. You can order the Simms G3 Stocking Foot Waders from our online store by at the shop. 

Make sure you read our wader care blog post to ensure your new G3 waders have the longest life. Or check out our extensive collection of Simms fishing gear.

We hope you found this wader review helpful.

If you have any questions, please feel free to contact us by email searun2013@gmail.com, by phone at 604-931-5044 or stop by the shop at #110 1140 Austin Avenue in Coquitlam BC.

Good luck on the water.

Follow and Like Us

Like us on Facebook: https://www.facebook.com/searun
Follow us on Instagram: http://instagram.com/searunflyandtackle
Email us: searun2013@gmail.com

0 comments

Leave a comment

All blog comments are checked prior to publishing

You have successfully subscribed!
This email has been registered